In Touch D34 |
|
Dimensions and Weight: | ![]() |
Weight: |
334g |
Controller: |
INVENTUS HMI 3.0 |
Actuator torque: |
Range from 0,05 Nm to 5 Nm. |
Sensor resolution: |
Internal up to 90.112 steps per revolution(0,004 degrees) |
Standard features: |
Standard features: Incremental sensor for encoders Push function |
Optional additional functions: |
Optional additional functions: X-/Y-axis control |
Standard interface: |
Standard interface: USB |
Optional interfaces: |
Optional interfaces: CAN |
Optional sensores: |
Optional sensores: Temperature sensor |
Supply: |
Supply: +5 VDC (USB, range +4,5…+5,5 V) |
Lighting: |
Lighting: 7 RGB LEDs> |
IP rating: |
IP rating: Depending on structure - typically Ip 54 – Splash proof |
System requirements: |
System requirements: Tablet applications - Windows 10, Driver library available> |
Power: |
Power: |
Actuator: |
Actuator: Max. 2,1 W |
Fine Ripple: |
Fine Ripple: Max. current 60 mA |
Medium Ripple: |
Medium Ripple: Max. current 270 mA |
End Stop: |
End Stop: Max. current 430 mA |
Controller: |
Controller: 0,3 W (full load controller, no energy saving mode) |
Lighting: |
Lighting: Max. 2,1 W at 7 RGB LEDs and max. brightness |